Removing tree stumps can prove difficult if you are not aware of what tools and techniques you need to use. You need the right equipment and some old-fashioned but necessary knowledge that can only come from years of experience. You can take many different approaches to remove tree stumps, but there is no one best method. See some of the common stump removal Adelaide methods and the types of equipment used for each:
Tree Removal by Bow. This is perhaps the oldest technique in removing tree stumps. The process is as easy as it sounds and involves creating a path for the stump’s movement through a high wire fence. You would first shoot the tree remains, and after it has died, you would dig a small hole. Then, using a sharp tool, remove the tree remains. You have to make sure that nothing goes to waste; always set aside a small amount of material you can throw away.
Tree Removal by Hoe. This is probably the easiest approach for removing tree stumps. It is effective for small tree stumps as well as tree ferns that are not very thick. In this approach, you would dig a hole in the ground close enough to the stump so that you can place your hoe in the hole.
Grinding. Grinding is the most traditional way of stump removal Adelaide. The process consists of working on the stump until it breaks. When this happens, you would move the grinding stump into a different location or take it with you when you go tree hunting. You can use a hand grinder, a stump scraper, a stump knife and a hammer to accomplish this.
Root Systems. Tree stump grinding is very effective for tree remains that are still attached to the root system. Further, if this is not possible, you may have to use a rooter. This is achieved by removing part of the root system of the tree. You can choose from various types of rooters depending on the tree you are removing. However, if you are unsure which type of router to use, you may consult an expert to give you advice.
Choosing the right kind of equipment is very important in stump removal Adelaide. Before you begin, you should test the equipment. While it does not require much work, choosing the wrong tool can cause you to make more problems instead of saving time and money. If you are interested in grinding, you must buy durable machines because they will last for many years. When you want to know more about stump removal, you should consult an expert who will better understand the process.